rev.2.00 nov 21, 2006 page 1 of 6 fs10as-2 high-speed switching use nch power mos fet rej03g0244-0200 rev.2.00 nov 21, 2006 features ? drive voltage : 10 v ? v dss : 100 v ? r ds(on) (max) : 0.23 ? ? i d : 10 a ? recovery time of the integrated fa st recovery diode (typ.) : 100 ns outline 1 1 3 3 2, 4 2 4 1. gate 2. drain 3. source 4. drain renesas package code: prss0004za-a (package name: mp-3a) applications motor control, lamp control, solenoid control, dc-dc converters, etc. maximum ratings (tc = 25c) parameter symbol ratings unit conditions drain-source voltage v dss 100 v v gs = 0 v gate-source voltage v gss 20 v v ds = 0 v drain current i d 10 a drain current (pulsed) i dm 40 a avalanche current (pulsed) i da 10 a l = 100 h source current i s 10 a source current (pulsed) i sm 40 a maximum power dissipation p d 30 w channel temperature tch ? 55 to +150 c storage temperature tstg ? 55 to +150 c mass ? 0.32 g typical value
fs10as-2 rev.2.00 nov 21, 2006 page 2 of 6 electrical characteristics (tch = 25c) parameter symbol min. typ. max. unit test conditions drain-source breakdown voltage v (br)dss 100 ? ? v i d = 1 ma, v gs = 0 v gate-source leakage current i gss ? ? 0.1 a v gs = 20 v, v ds = 0 v drain-source leakage current i dss ? ? 0.1 ma v ds = 100 v, v gs = 0 v gate-source threshold voltage v gs(th) 2.0 3.0 4.0 v i d = 1 ma, v ds = 10 v drain-source on-state resistance r ds(on) ? 0.16 0.23 ? i d = 5 a, v gs = 10 v drain-source on-state voltage v ds(on) ? 0.80 1.15 v i d = 5 a, v gs = 10 v forward transfer admittance | y fs | ? 9.0 ? s i d = 5 a, v ds = 5 v input capacitance ciss ? 600 ? pf output capacitance coss ? 125 ? pf reverse transfer capacitance crss ? 40 ? pf v ds = 10 v, v gs = 0 v, f = 1mhz turn-on delay time t d(on) ? 18 ? ns rise time t r ? 20 ? ns turn-off delay time t d(off) ? 30 ? ns fall time t f ? 18 ? ns v dd = 50 v, i d = 5 a, v gs = 10 v, r gen = r gs = 50 ? source-drain voltage v sd ? 1.0 1.5 v i s = 5 a, v gs = 0 v thermal resistance rth(ch-c) ? ? 4.17 c/w channel to case reverse recovery time t rr ? 100 ? ns i s = 10 a, dis/dt = ?100 a/ s
fs10as-2 rev.2.00 nov 21, 2006 page 3 of 6 performance curves drain power dissipation derating curve case temperature tc (c) drain power dissipation p d (w) maximum safe operating area drain-source voltage v ds (v) drain current i d (a) 0 10 20 30 40 50 0 200 50 100 150 10 ?1 5 7 10 0 2 3 5 7 10 1 2 3 2 3 5 7 210 0 357 2 10 1 357 2 10 2 357 5 2 tw = 10s tc = 25c single pulse 100s 10ms 1ms dc output characteristics (typical) drain current i d (a) drain-source voltage v ds (v) output characteristics (typical) drain current i d (a) drain-source voltage v ds (v) on-state voltage vs. gate-source voltage (typical) gate-source voltage v gs (v) drain-source on-state voltage v ds(on) (v) on-state resistance vs. drain current (typical) drain current i d (a) drain-source on-state resistance r ds(on) (? ) 0 4 8 12 16 20 0 1.0 2.0 3.0 4.0 5.0 p d = 30w tc = 25c pulse test 6v 7v 5v 0 2 4 6 8 10 0 0.4 0.8 1.2 1.6 2.0 tc = 25c pulse test 6v 5v v gs = 20v 10v v gs = 20v 10v 7v 0 1.0 2.0 3.0 4.0 5.0 048121620 i d = 15a tc = 25c pulse test 10a 5a 0 0.1 0.2 0.3 0.4 0.5 10 ?1 210 0 357 2 10 1 357 23 10 2 57 v gs = 10v tc = 25c pulse test 20v
fs10as-2 rev.2.00 nov 21, 2006 page 4 of 6 transfer characteristics (typical) gate-source voltage v gs (v) drain current i d (a) forward transfer admittance vs. drain current (typical) drain current i d (a) forward transfer admittance | y fs | (s) 048121620 10 0 2510 2 37 2510 1 37 0 4 8 12 16 20 tc = 25c v ds = 10v pulse test 10 0 10 1 2 3 5 7 10 2 2 3 5 4 4 7 v ds = 5v pulse test tc = 25c 75c 125c switching characteristics (typical) drain-source voltage v ds (v) capacitance vs. drain-source voltage (typical) drain current i d (a) capacitance (pf) switching time (ns) gate-source voltage vs. gate charge (typical) gate charge qg (nc) gate-source voltage v gs (v) source-drain diode forward characteristics (typical) source-drain voltage v sd (v) source current i s (a) 10 0 2510 2 37 2510 1 37 10 1 10 2 2 3 5 7 10 3 2 3 5 7 10 4 2 3 5 7 10 0 357 2 10 1 357 2 10 2 33 57 2 ciss coss crss tch = 25c f = 1mhz v gs = 0v 10 0 10 1 2 3 4 5 7 10 2 2 3 4 5 7 td(off) td(on) tr tch = 25c v dd = 50v v gs = 10v r gen = r gs = 50? tf 0 4 8 12 16 20 0481216 20 v ds = 20v 50v 80v tch = 25c i d = 10a 0 8 16 24 32 40 0 0.4 0.8 1.2 1.6 2.0 v gs = 0v pulse test tc = 125c 75c 25c
fs10as-2 rev.2.00 nov 21, 2006 page 5 of 6 channel temperature tch (c) drain-source on-state resistance r ds(on) (tc) threshold voltage vs. channel temperature (typical) gate-source threshold voltage v gs(th) (v) on-state resistance vs. channel temperature (typical) drain-source on-state resistance r ds(on) (25c) channel temperature tch (c) 10 ?1 10 0 2 3 4 5 7 10 1 2 3 4 5 7 ?50 0 50 100 150 v gs = 10v i d = 1/2 i d pulse test 0 1.0 2.0 3.0 4.0 5.0 ?50 0 50 100 150 v ds = 10v i d = 1ma transient thermal impedance characteristics channel temperature tch (c) breakdown voltage vs. channel temperature (typical) pulse width tw (s) transient thermal impedance zth(ch?c) (c/w) drain-source breakdown voltage v (br)dss (tc) drain-source breakdown voltage v (br)dss (25c) switching time measurement circuit switching waveform 0.4 0.6 0.8 1.0 1.2 1.4 ?50 0 50 100 150 v gs = 0v i d = 1ma 10 ?4 10 2 7 5 3 2 10 1 7 5 3 2 10 0 7 5 3 2 23 57 23 57 23 57 23 57 10 0 23 57 10 1 23 57 10 2 10 ?3 10 ?2 10 ?1 10 ?1 single pulse 0.5 0.2 0.1 0.05 0.02 0.01 d = 1.0 t r t d(on) vin 90% 90% 10% 10% vout t d(off) 90% 10% t f vin monitor d.u.t. r l v dd vout monitor r gen r gs p dm tw d = t tw t
fs10as-2 rev.2.00 nov 21, 2006 page 6 of 6 package dimensions sc-63 0.32g mass[typ.] ? prss0004za-a renesas code jeita package code previous code unit: mm 10.4max 1max 0.5 0.2 0.1 0.1 0.5 0.2 0.76 0.76 0.2 2.3 0.2 5.3 0.2 6.6 1.4 0.2 6.1 0.2 1 0.2 2.3 2.5min 2.3 1 package name mp-3a order code lead form standard packing quantity standard order code standard order code example surface-mounted type taping 3000 type name ? t +direction (1 or 2) +3 FS10AS-2-T13 surface-mounted type plastic magazine (tube) 75 type name fs10as-2 note : please confirm the specificat ion about the shipping in detail.
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas products for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a renesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas shall have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from renesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renesas semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to "http://www.renesas.com/en/network" for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jalan persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2006. renesas technology corp., all rights reserved. printed in japan. colophon .7.0
|
